Getting Started - NeoMatic 430 User Instructions

Getting started:

Turn on and turn off the ear piece [sound amplification unit]-
Locate the ON/OFF switch on the back of the device casing;
slide to its "ON" position to turn on the device, slide same
switch to its "OFF" position to turn off the device.
Charging the device:
The device is operated by a built-in rechargeable lithium
battery can either be charged by the AC power adapter
connecting to the wall outlet or choose to charge the device
with the USB cable by connecting to any equipment that is
installed with USB power outlet. This device is rechargeable,
there are no needs of replacing batteries. For charging the
device please follow the procedures below:
1. Turn off the ear piece by switching the ON/OFF switch to
its OFF position.
2. Flip-open the silicone rubber stopper, plug the mini USB
connector of the USB cable into the USB power socket of the
device. See illustration on Page#6.
3. Insert the regular USB connector on the other end of the
USB cable to the USB socket of the AC power adapter.
4. Then plug the AC power adapter into the wall outlet for
charging up by alternating current.
5. When connecting to an USB power outlet of a third party
equipment the AC power adapter is NOT required to install.
- 5 -