Table of Contents
Advertisement
Package Content
Package Content
Check that the package contains:
Qty
1
6
6
2
1
1
1
1
24
24
24
1
Additional Equipment and Tools required for Installation
Ethernet cable (straight for connecting to a hub/switch)
Crimping tool for RJ-45 connectors.
Ground cable with an appropriate termination.
Mains plug adapter or termination plug (if the power plug on the supplied AC
power cord does not fit local power outlets).
Portable PC with Ethernet card and Telnet software and a straight Ethernet
cable.
Description
WBS-700 outdoor unit with connections to external antennas
N-type to N-type RF cables
Antennas
CLAMPS 46-125 X 14 MM STST
POST CLAMP
Safety cable
POE injector unit with wall mounting kit
AC PLUG, US
Screws 10-32 X 1/2" SOCKET CAP SCREW
Lock Washers
FLAT Washers
LN tool , 4mm Allen wrench
Sealing tape SCOTCH 130C
:
WARNING
Use straight Ethernet (POE) cable connecting the injector to WBS-700 in order to have
all the features work properly (reset button and Link LED). Using cross cable might cause turn
Link led to "ON" permanently and also may be the cause software reset. DATA cable connecting
the injector to the network can be cross cable as well.
Chapter 3
Installation Guide
7
Advertisement
Table of Contents
