Turning The Alarms On Or Off; Snooze/Dimmer Button Functions - Altec Lansing timeMachine IMW465 Owner's Manual

Turning the Alarms ON or OFF

Once you have setup your alarm, you can choose to turn it on or off.
1. Press and release the AL1 or AL2 button as needed to alarm 1 or alarm 2 ON and OFF. You will see an
alarm icon appear on the display screen to indicate when the alarm is turned on. This icon will disappear when
the alarm is turned off.

Snooze/Dimmer Button Functions

When the alarm is going off, you can use the snooze function to temporarily quiet the alarm so that you can
have some extra rest. The dimmer button increases or decreases the brightness of your display screen.
1. When the alarm is sounding, press the SNOOZE/DIMMER button to temporarily silence the alarm. By
default, the alarm is silenced for 9 minutes. Snooze can be used repeatedly as the alarm continues to sound.
Touchless Snooze Control
You can also activate the snooze feature without physically touching the SNOOZE/DIMMER button. To do so,
simply place your hand near the front panel display screen of your device. The front panel has a built in wave
sensor which works by detecting body heat. For best results, your hand should be within 24 inches of the front
panel display screen to activate Touchless Snooze Control.
2. To adjust the brightness of the display screen, press the SNOOZE/DIMMER button during normal operation
(when no alarm is sounding) to cycle through the brightness display settings.