Altec Lansing DUAL MOTION IMW140 Quick Start Manual

DUAL MOTION
1. Make sure the following items are
included in your package.
IMW140
4. Pairing Your Speaker With a Bluetooth Phone
-Slide the ON/OFF Switch to the ON position. Your speaker will enter
pairing mode and the LED Indicator Lights will alternately turn blue
and red.
-Go to the Bluetooth Manager of your Bluetooth device. Search
Bluetooth devices and select "Dual motion" to start connecting.
-If required, enter the PIN code "0000" and confirm the entry. Once
paired successful, the speaker will connect to your Bluetooth device
automatically.
2. For a look at the various buttons on your speaker,
view the graphic below.
USB Cable
① Play/Pause
② Volume –
③ Volume +
AUX Cable
④ Answer
⑤ LED Indicator Lights
⑥ ON/OFF Switch
⑦ Charging Port
⑧ AUX IN port
5. Listening to Music on Your Speaker
Play/Pause
Press the Play/Pause button to get music from your audio
source to play or pause.
Next/Previous Song
Press and hold the Volume + or Volume- buttons for 2s to
advance to the next song or go back to the previous one.
Increase/Decrease Volume
Press the Volume + or Volume - buttons to increase or
decrease the volume.
Quick Start Guide
1 2 3 4 5
6 7 8
3. Charging: In order to charge your speaker's internal battery, connect
one end of the included USB cable to the charging port on
your speaker. Connect the other to a USB port or AC
charging adapter (not included). An LED indicator Light turns
red when charging, and turns o when fully charged.
Charging may take up to 3 hours.
6. Using Your Speaker During Phone Calls
Last Number Redialing
Quickly tap on the Answer button twice and the last number that you
dialed will be redialed.
Answering an Incoming Call
To answer an incoming call, quickly press the Answer button.
Ending a Call
To end a call, quickly press the Answer button, and the call will be
disconnected.
Adjusting Volume
By pressing the Volume Up or Volume Down buttons you can increase
or decrease the volume of the phone call.
Indicator