Alliance Laundry Systems LES33 Installation Instructions Manual
Alliance Laundry Systems LES33 Installation Instructions Manual

Alliance Laundry Systems LES33 Installation Instructions Manual

Hide thumbs Also See for LES33:

Advertisement

Quick Links

Installation Instructions

for Dryers
Inside........................................
Dimensions........................................................................
Before You Start................................................................
Installing the Dryer............................................................
Installer Checklist.............................................. Back Cover
Date Purchased _____________________
Model Number _____________________
Serial Number _____________________
Keep these instructions for future reference.
(If this machine changes ownership, this manual must accompany machine.)
3
4
5
www.comlaundry.com
Part No. 510953R5
January 2009

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the LES33 and is the answer not in the manual?

Questions and answers

Summary of Contents for Alliance Laundry Systems LES33

  • Page 1: Installation Instructions

    Installation Instructions for Dryers Inside........Dimensions................ Before You Start..............Installing the Dryer............Installer Checklist..........Back Cover Date Purchased _____________________ Model Number _____________________ Serial Number _____________________ Keep these instructions for future reference. (If this machine changes ownership, this manual must accompany machine.) Part No.
  • Page 2 All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any means without the expressed written consent of the publisher. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 3 DRY2259N (2.3 in.) (23.5 in.) *10.2 cm 68.3 cm (26.9 in.) (4.0 in.) GAS DRYERS DRY2259N *With leveling legs turned into base. 3/8 in. NPT Gas Connection © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 4: Before You Start

    W299 DRY911N DRY911N Wrench Screwdriver Level Duct Tape Teflon Tape (Gas Models) 1/4 in. Driver Figure 1 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 5: Installing The Dryer

    Outer Wall of Enclosure **NOTE: For new installations, locate top of wall vent 106.7 cm (42 in.) above floor to make venting easier to connect. Figure 2 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 6 W045 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 7: Exhaust Direction

    • Sufficient make-up air must be supplied to replace the air exhausted by the dryer. The free area of any opening for outside air must be at least 260 cm (40 in. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 8: Exhaust System

    NOTE: The maximum length of a 10.2 cm (4 in.) diameter flexible metal duct must not exceed 2.4 m (7.87 ft.), as required to meet UL2158, clause 7.3.2A. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 9 (2500 feet) the natural gas valve spud orifice size must Use 12.7 mm (1/2 in.) pipe be reduced to ensure complete combustion. Refer to 3/8 in. NPT Gas Connection Table 2. Figure 5 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 10 W155 5. Secure the strain relief to the power cord, or wires, where they enter the dryer cabinet. 6. Reinstall access cover and screw. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 11 To reduce the risk of an electric shock, serious injury or death, NEVER operate the dryer with the access cover removed. D273P W157 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 12 7. Reinstall nine screws removed in Step 2. D618I D618I Figure 7 DRY1919N DRY1919N 8. Using screwdriver, remove two door plugs, and reinstall on opposite side of door opening. D620I D620I © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 13 D693I MODEL LGS17A*F3020 D693I Lead-In Cord Lead-In Cord Plug Earth Figure 8 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 14 This dryer is designed to be operated on a two-wire plus earth, 240 Volt, 50 Hertz, single phase circuit fused at 30 Amperes. D694I MODEL LES33A*F4562 D694I Lead-In Cord Lead-In Cord Plug Earth Figure 9 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 15 Connect the dryer to an electrical power source. Refer to Step 4 for information on connecting power cord. manual and make sure that dryer is installed correctly. © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 16: Electric Dryers

    D700I Closed Position 3.1 mm (1/8 in.) Pipe Plug Shut-Off Valve Handle (for checking manifold presure) Air Shutter Lockscrew Open Position Air Shutter Figure 11 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT 510953...
  • Page 18 Installer Checklist Fast Track for Installing the Dryer (Refer to the manual for more detailed information) • Position and • Wipe Out Inside of Level the Dryer. Dryer. LEVEL D255I D255I D256I CHECK CHECK D618I D618I D259I • Connect Dryer •...

Table of Contents