Overstruck Smart Labels; Smart Label Limitations - Printronix T5000 Quick Setup Manual

Overstruck Smart Labels

If an RFID tag within a smart label is deemed unacceptable after
execution of the defined number of internal retries, the following
actions are performed:
•
If Error Handling is set to Overstrike (the default), the
unacceptable smart label will print with a grid Overstrike
pattern. If the Label Retry Count is greater than zero (the
default is 5), the next smart label will be tried until the label retry
count is exhausted.
•
If Error Handling is set to Stop, the printer will stop, give an
error message, and discard the failing form data.
•
If Error Handling is set to None, the printer will continue to the
next smart label with the next form and discard the failing form
data.

Smart Label Limitations

The smart labels currently supported have the following
characteristics:
•
UHF 915MHz radio frequency identification tag inlay
•
EPC class 1 tags – 64 data bits Write Few / Read Many
•
4 inch x 6 inch label stock
•
Nominal roll size is 500 smart labels. An additional number of
smart labels may be added to the Printronix smart label rolls to
compensate for tags that are deemed unacceptable. This is so
you can have 500 "good" labels.
NOTE: It is highly recommended that additional smart labels are
purchased directly from Printronix to assure the highest
level of performance and reliability. See "How To Order
More Smart Labels" on page 17.
Overstruck Smart Labels
15