Table of Contents
Advertisement
• From the base unit, select Alert Tones > OK > On to enable
alert tones.
• Ensure the home screen is displayed on the base unit.
TIP: You can select
My dog collar device is not responding
If you are having trouble connecting the dog collar device to the
Garmin Canine app or the base unit, you can try these options.
• Wake the device by shaking it.
The dog collar device maximizes battery life by entering
sleep mode when the device is stationary.
• Turn the device off and on again.
How do I know which dog collar device is
paired?
If you have more than one paired dog collar device, you can use
the Garmin Canine app to determine which device is paired
before fitting the collar on your dog. This helps ensure you are
training the correct dog, because all BarkLimiter and Keep Away
Tag settings are stored on the dog collar device.
1
Open the Garmin Canine app on your smartphone.
2
In the training remote, select the tone option.
The device sounds an audible tone.
My dog is still barking
If the dog continues barking while wearing the device, you can
try any of these options to improve the effectiveness of the
device.
• Tighten the collar until it is very snug
Your Dog, page
3).
• Adjust the position of the device on the dog's neck
Collar on Your Dog, page
• Wiggle the device to work the contact points through the
dog's coat.
• Gradually increase the intensity level
Intensity Level, page
3).
The bark detection is too sensitive
If the BarkLimiter feature activates when the dog is not barking,
or if the bark detection appears to be too sensitive, you can try
these tips.
• Use the Garmin Canine app to adjust the amount of barking
allowed before correcting your dog.
• Use the Garmin Canine app to turn off the BarkLimiter
feature during heavy play, when the dog is very active, or
when the dog is eating.
• Remove all other collars, tags, or other items from your dog.
Maximizing Battery Life
• Disable all unused Keep Away Tag sensors.
Resetting the Dog Collar Device
If your dog collar device stops responding, you can reset the
device.
Hold
for 8 seconds and the device beeps.
Troubleshooting
to return to the home screen.
(Fitting the Collar on
3).
(Choosing the Correct
(Fitting the
9
Advertisement
Table of Contents
