Panasonic CN-GP50U Important Information Manual page 13

Handling the unit
Do not drop the unit or hit it against anything
while carrying it.
Furthermore, be careful not to subject the unit to
strong pressure.
l Do not sit down while the unit is in your pants
pocket, and do not force the unit into a bag
that is already full.
Be careful even when the unit is in a bag,
l
because if you drop the bag or hit it against
something it will subject the unit to a strong
impact.
l A strong impact could break the liquid
crystal display or the exterior, resulting in a
malfunction.
Turn off the main power of the unit while carrying
it.
l Otherwise, the battery may run out of power,
because the unit still uses a small amount of
power while in standby.
When using insecticide or volatile substances
nearby, be careful not to expose the unit to them.
l If you expose the unit to insecticide or volatile
substances, the exterior may degrade or the
paint may peel.
l Do not let the unit make contact with rubber
or plastic products for a long time. It may
affect the exterior of the unit and degrade it.
Notes on SD Memory Card
The unit supports SD Memory Cards of up to
 GB. Cards of 4 GB or above (SDHC memory
card) cannot be used, because the standard is
different.
Observe the following cautions in order to
prevent damage to data or an SD Memory Card,
or a malfunction of the unit.
(Panasonic assumes no responsibility whatsoever
for damage resulting from loss of data.)
l Do not turn off the power of the unit while
writing data to an SD Memory Card.
Do not touch the contacts on the back of an
l
SD Memory Card with a hand or metal object,
or allow them to get dirty.
l Do not remove the label affixed to an SD
Memory Card.
l Do not affix a sticker or label on top of another
one.
l Do not subject an SD Memory Card to a
strong impact, or bend, drop, expose it to
water, etc.
Notes:
l An SD Memory Card may become hot after it
is used for a long period of time, but this does
not indicate a malfunction.
l A card has a limited life. Operations such as writing
and deleting may become no longer possible after
the card is used over a long period.
l An SD Memory Card may not work properly if
it is defective.
l The recommended product number may
change without notice.
l When an SD Memory Card is not working
properly, remove and re-insert the SD
Memory Card.
l When you want to use a mini SD card or
micro SD card with the unit, be sure to attach
the dedicated adapter (supplied with the mini
SD card or micro SD card).
Make sure the adapter is ejected and inserted
together with the card to ensure just the
adapter is not left inside the unit.
 List of supported SD Memory Cards
SD Memory Card (Recommended Product)
Capacity Product Number
51MB RP-SDR51U1A
1GB RP-SDR01GU1A
1GB RP-SDV01GU1A
GB RP-SDM0GU1A
GB RP-SDV0GU1A
(As of September 00)
13
1