Managing Individual Modules From The Cli - Fortinet FortiGate-7060E Handbook

Connecting to module CLIs using the management module
FortiGate-7000 special administration port numbers
Slot Number Slot Address
5 Processor module FPM05
3 Processor module FPM03
1 Primary Interface module FIM01
2 Interface module FIM02
4 Processor module FPM04
6 Processor module FPM06
For example:
To connect to the GUI of the interface module in slot 3 using HTTPS you would browse to
l
https://192.168.1.99:44303.
To send an SNMP query to the processor module in slot 6 use the port number 16106.
l
The FortiGate-7000 configuration is the same no matter which modem you log into. Logging into different
modules allows you to use FortiView or Monitor GUI pages to view the activity on that module. Even though you
can log into different modules, you should only make configuration changes from the primary interface module;
which is the FIM module in slot 1.

Managing individual modules from the CLI

From the CLI you can use the following command to switch between chassis slots and perform different
operations on the modules in each slot:
execute load-balance slot {manage | power-off | power-on | reboot} <slot-number>
Use manage to connect to the CLI of a different module, use power-off, power-on, and reboot to turn off
or turn on the power or reboot the module in <slot-number>.
Connecting to module CLIs using the management module
All FortiGate-7000 chassis includes a front panel management module (also called a shelf manager) on the
chassis front panel. See the system guide for your chassis for details about the management module.
33
Getting started with FortiGate-7000
HTTP Telnet
HTTPS (443)
(80) (23)
8005 44305
8003 44303
8001 44301
8002 44302
8004 44304
8006 44306
SSH (22) SNMP (161)
2305 2205 16105
2303 2203 16103
2301 2201 16101
2302 2202 16102
2304 2204 16104
2306 2206 16106
FortiGate-7000
Fortinet Technologies Inc.