Fim-7910E Interface Module - Fortinet FortiGate-7060E Handbook

FIM-7904E interface module
FIM-7904E hardware architecture

FIM-7910E interface module

The FIM-7910E interface module is a hot swappable module that provides data, management and session
sync/heartbeat interfaces, base backplane switching and fabric backplane session-aware load balancing for a
FortiGate-7000 series chassis. The FIM-7910E includes an integrated switch fabric and DP2 processors to load
balance millions of data sessions over the chassis fabric backplane to FPM processor modules.
The FIM-7910E can be installed in any FortiGate-7000 series chassis in hub/switch slots 1 and 2. The FIM-7910E
provides four C form-factor pluggable 2 (CFP2) interfaces for a FortiGate-7000 chassis. Using a 100GBASE-
SR10 multimode CFP2 transceiver, each CFP2 interface can also be split into ten 10GBASE-SR interfaces.
FIM-7910E front panel
FortiGate-7000
Fortinet Technologies Inc.
FIM-7910E interface module
22