Advertisement
Before you begin
CAUTION: The soleplate becomes very hot during use. Always allow the iron to cool down before carrying out any
maintenance or trouble shooting. Do not use hot or boiling water to fill the water tank. Don't over fill the water tank
or exceed the maximum amount required. Always unplug from the mains before topping the tank up with water.
Always switch off the iron and allow to cool before emptying the water tank.
IMPORTANT: When using the iron basic safety precautions should always be observed.
Don't aim the steam jet at people, animals, plants and electrical components or wires. Never touch the steam
jet (there is a risk of scalding).
Before first use remove labels and all packaging.
Always make sure the water fill cover is closed correctly before use.
Filling the water tank
NOTE: The iron can be filled with tap water. For hard water areas we recommend the use of distilled
or demineralised water. Half fill the water tank with distilled or demineralised water and top up to the
'Max' line with tap water.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals to the water tank.
When filling make sure the appliance is unplugged.
With the iron disconnected
from the mains open the
water fill cover.
Tilt the iron forwards.
Using the jug provided fill
the water tank up to the
Max fill line.
Getting started
Close the water fill cover.
Advertisement
