Getting Started - Vax ICC1V1EP Let's Get Started

Getting to know your appliance
Spray burst button
Steam boost button
Steam control
Water fill cover
Spray
burst nozzle
Self clean button
Water tank
Technical Specification
Name Power Shot
Model number ICC1V1EP
Power input Please refer to rating label
Tank capacity 300ml
Weight 1.1kg
Subject to technical change without notice.
Before you begin
CAUTION: The soleplate becomes very hot during use. Always allow the iron to cool down before carrying out any
maintenance or trouble shooting. Do not use hot or boiling water to fill the water tank. Don't over fill the water tank
Heating Indicator Light
or exceed the maximum amount required. Always unplug from the mains before topping the tank up with water.
Always switch off the iron and allow to cool before emptying the water tank.
IMPORTANT: When using the iron basic safety precautions should always be observed.
Don't aim the steam jet at people, animals, plants and electrical components or wires. Never touch the steam jet
Power cord
(there is a risk of scalding).
Before first use remove labels and all packaging.
Handle
Always make sure the water fill cover is closed correctly before use.
Temperature
control dial
Filling the water tank
NOTE: The iron can be filled with tap water. For hard water areas we recommended the use of distilled or
demineralised water. Half fill the water tank with distilled or demineralised water and top up to the 'Max' line
with tap water.
Do not add perfume, vinegar, starch, descaling agents, ironing aids or other chemicals to the water tank.
When filling make sure the appliance is unplugged.
Soleplate
With the iron disconnected
from the mains open the
water fill cover.

Getting started

Tilt the iron forwards. Close the water fill cover.
Using the jug provided fill
the water tank up to the
Max fill line.