Bluetooth - Q Set Aviator CN-1000AC-BT User Manual

5. Bluetooth works when the mode setting switch is positioned on A or B.
Bluetooth volume control: Press "+" or "-" to turn up or down the volume of blue tooth
connected device. Holding "+" or "-" will keep the volume up or down, see Figure 5
Pairing: device name—BT-ANR; pairing code: 0000 (four zeros). The first Bluetooth
device connecting to the headset will be paired automatically.
Pairing the second device: manual pairing is required. Press the Bluetooth button for 5
seconds to start pairing.
Re-pairing: re-pairing starts automatically if the phone moves
out of the Bluetooth scope and thus gets disconnected. The phone will be
disconnected if the re-pairing cannot succeed
In 5 minutes.
Re-connecting: click the Bluetooth
button to re-connect to the last connected
phone. The call ends after the BEEP.
Rejecting calls: Press the Bluetooth button
for 3 seconds.