Prepare Headset For Use - Q Set Aviator CN-1000AC-BT User Manual

Prepare Headset for Use

1. Rotate the flexible boom overhead to wear the microphone on either the right or left
side of the head.
2. Rotate the headset volume control (on the side of the battery box) down to the mini-
mum position, before the headset plug is inserted into the aircraft or intercom.
3. With the headband resting securely on the top of the head, check that the ear seals are
centered over the ears.
4. For best noise cancellation, position the microphone in front of your lips.
5. Insert the microphone plug (PJ068) into the aircraft or intercom microphone jack.
Insert the earphone plug（PJ055） into the aircraft or intercom earphone jack.
6. Volume Adjustment Procedure: Rotate the volume control up to a comfortable level.
7. Auxiliary (AUX) audio input: Insert the plug (3.5mm plug) of your external audio
device into the AUX jack on the side of battery box as indicated. The volume is con-
trolled by your audio device.
8. Bluetooth function: as indicated in operation 5.