Mode Settings - Q Set Aviator CN-1000AC-BT User Manual

2. S/M switch: There is an s / m switch inside the
battery box, see Figure 4. Ensure the switch is on
Mono to make both ears active (on most aircraft).
3. Light Indication for Power:
Press power button for 0.5 seconds, ANR
starts working.
Flash in green—battery fully charged;
Flash every 2 seconds in amber—battery low;
Flash every 1 second in red—battery dying.
4. Mode Setting:
When it is on, press Bluetooth button for 1 second to start the
Bluetooth function.
Mode Setting:
A:Intercom Priority —When intercom is busy, Bluetooth and
AUX will be attenuated.
B:Intercom, Bluetooth and AUX –All three channels are open.
C:Intercom Only –Only intercom is on. Bluetooth and AUX are both off.
The prioritization of Bluetooth and AUX is:
Bluetooth phone >AUX > Bluetooth music