Advertisement
• To stop scanning, briefly press and release "MON" button.
Scan Advance
If scan stops on a channel that you don't want to listen to, briefly press "+" or "-" button to resume scanning for the next active
channel.
Nuisance Delete
If scan continuously stops on an undesired channel, press and hold "+" or "-"
button for least 3 seconds, then release. This will temporarily remove the undesired channel from the scan list.
To restore the channel to the scan list, turn the radio off and then on. You cannot remove your home channel from the scan list
(your home channel is the channel your radio was set to when you activated scan).
Hands Free Use (VOX)
VOX allows you to transmit "handsfree" by talking while using VOX accessories connected to the radio.
Note: When using audio accessories with your radio, turn your radio off before you place the accessory on your head or in
your ear.
How To Use The VOX Feature
• Turn off your radio.
• Open the accessory cover and insert the audio accessory into the accessory jack.
• Switch on your radio. The "VOX" icon will appear in the display to indicate that the VOX feature is active.
• To transmit, speak into the accessory microphone. To receive, stop talking.
• Pressing "PTT" button or removing audio accessory will disable VOX operation.
How To Use The IVOX Feature
• Turn off your radio.
• Turn on your radio with "PTT" button pressed, The "VOX" icon will appear in the display to indicate that the IVOX feature
is active.
• To transmit, speak into the radio microphone. To receive, stop talking.
• Pressing "PTT " for transmit will disable IVOX operation.
• When power up with IVOX active, Pressing "PTT " for transmit will disable IVOX operation. After that, you can press
"PTT" button for a very short time to active IVOX again. The " VOX" Icon will display again.
Note: There is a short delay after you start talking, before the radio transmits.
Setting Sensitivity Levels
Adjusting your radio's VOX and/or microphone sensitivity level helps to minimize the possibility of unintended noises
triggering a transmission, or enhances the ability to pick up quiet voices. If an accessory is fitted to your radio these
instructions will help you to adjust the VOX sensitivity and if no accessory is
fitted you will adjust the Microphone sensitivity. If IVOX is active , you will adjust the IVOX sensitivity level.
• Press "MENU" until "VOX" and a flashing number appear. If IVOX active. In code position display "I", otherwise you will
select VOX or microphone sensitivity level.
• Select sensitivity level of 1, 2 or 3 by using "+" or "-".
1 - If you speak loudly, or are in a noisy environment.
2 - Suitable for most applications.
3 - If you speak softly, or are in a quiet environment.
Note: When you connect a VOX accessory, the radio will automatically be set to the last chosen VOX sensitivity level. If
IVOX is active, the radio will automatically select IVOX level.
Vibrate (For selected models only)
Some radio can be set to vibrate when it receives the first incoming transmission . vibrate is then suspended until 30 seconds
after channel activity has finished.
• press "MENU" until the vibration icon shows in the LCD
• Set to "Y" to enable and "-" to disable the vibrate feature
ALERTS
Channel Busy Indicator
The red LED will flash twice per second to indicate that the channel is in use.
Call Tone
Press "CALL" button to transmit your call tone, alerting users on the same
channel and code that you are about to talk. Your radio has 10 call tones (depend on model) to choose from. Setting the call
tone to 0 disables ^.
To Set the Call Tone
• With the radio on, press "MENU" button until "CA" appears in the display.
• Current call tone setting will begin to flash.
• Press "+" or "-" to change and hear call tones while the setting number is flashing.
• Press "PTT" to set new call tone.
Roger Beep (Talk Confirmation Tone)
When you turn on this feature, your two-way radio transmits a unique tone when you finish transmitting. It's like saying
'Roger' or 'Over', and lets others know you've finished talking.
• To enable or disable the roger beep, press and hold "+" button as you turn your radio on.
• When the roger beep is enabled Icon will show in the display.
• When you release the "PTT" button you will hear the roger beep.
Advertisement
