Advertisement
KNOW YOUR PRODUCT
Function setting of WS1200:
1
2
Function setting of remote transmitter WT490:
READ THIS BEFORE YOU BEGIN
For the best operation:
1. Insert batteries for remote transmitter(s) first, and then the receiver
2. Place the receiver and remote transmitter(s) close together. This will ensure that the receiver can
synchronize with remote transmitter(s).
3. Place the remote transmitter(s) within effective transmission range.
* Although remote transmitter are weather proof, it is recommended to place it away from direct sunlight, rain or snow. This will help to
make measurement more accurate.
# The building materials and where the receiver and remote transmitter are positioned vastly affect the effective range. Try various set-ups
for best result.
4
3
6
7
1.
°C / °F
Change between
2. MAX / +
Increase the value during setting status /
Show maximum temperature detected by local
and remote sensors
5
3. MODE
Scroll between clock, date setting mode
12/24 hr clock display selection
4. MIN / -
Decrement the value during setting status /
Show minimum temperature detected by local
and remote sensors
5. CHANNEL
Scroll through remote channels 1-4 /
Manual start remote channel learning
6. SET
Confirm "House Code" ("01" to "15") & Channel
("1" to "4")
7. C/F
Select channel (1-4)
°C or °F display format
2 of 6
Advertisement
