UPM WD633 Owner's Manual

WD633 + WT440H
Wireless Weather Station
Congratulations on your purchase of this
weather station set, WD633 + WT440H.
Please take the time to read and
understand this manual so you can begin
to enjoy the convenience and features this
product has to offer.
FEATURES
:
Main Display Unit WD633
* dual clock and dual alarm
* calendar (date/day/month/year)
* local temperature display
* receives and displays temperature and
humidity from up to 4 remote transmitters
via RF technology of 433MHz
* minimum/maximum temperature memory
* temperature and humidity trend indicator
* local/remote temperature alarms

* weather icons

* moon phase symbols
1
° °
* user-selectable C or F
* battery type: 2 x AA
Remote Transmitter WT440H
* drip-proof design with LCD screen
* temperature display in user-selectable
° °
C or F
* humidity display
* transmission range: up to 40 metres in
open area
* table stand or wall mountable
* battery type: 2 x AA
Transmitter
PAGE 1

CALENDAR SETTING

Date Setting :
1 Scroll to the Date mode using MODE .
2
Press HOUR/+/MAX to set the month.
3
Press MINUTE/-/MIN to set the date.
NOTE: Weekday is automatically determined from the year/month/date setting.
February will have either 28 or 29 days depending on the year setting.
Year Setting :
1 Scroll to the Year mode using MODE .
2 Press + or key to adjust the year. -
TEMPERATURE & HUMIDITY DISPLAY
Local (Indoor) Temperature
The local (indoor) temperature will display instantly after
*
batteries are inserted into the receiver.
Remote (Outdoor) Temperature and Humidity
If the Learn Function is performed successfully (refer to the WIRELESS
*
TRANSMISSION section), the remote (outdoor) temperature and humidity will
display on the bottom of the LCD screen.
*
OUT
Press CHN to toggle between
A
Channels 1, 2, 3 and 4.
Remote Temperature
NOTE: The temperature and humidity data will
° °
Selecting C or F Temperature Display
° °
Toggle between C and F by pressing
B
° °
C/ F in either Clock 1 or Clock 2 mode.
PAGE 10

GETTING STARTED

MODE/SNOOZE: scrolls through Clock 1&2,
1
Alarm 1&2, Date & Year, and (Upper & Lower)
Temperature Alarm Mode; snooze for alarm
HOUR/+/MAX: shows maximum
MOON PHASE
2
temperature; adjusts clock, alarm, date &
year and temperature alarm values
MONDAY
CLOCK1
MINUTE/-/MIN: shows minimum
3
IN
temperature; adjusts clock, alarm, date &
year and temperature alarm values
TREND
OUT
ALARM/( C/ F): toggles between
4
TREND
24 hour format, Alarm 1 & 2 on and off; disables
upper & lower temperature alarms
CHN: scrolls through remote channels (1 to 4);
5
scrolls through local and remote channels (1 to 4)
in (upper & lower) temperature alarm mode
WD633 6
SET: activates SET function
Receiver
C/F: changes House Code and Channel Code;
7
selects °C or °F
8
Battery Compartment
9
LCD Screen
10
Battery Cover
WT440H
11
Wall Mount Bracket & Table Stand
TEMPERATURE & HUMIDITY DISPLAY
Min and Max Temperature
MONTH DAY
MONDAY
2
3 Press
1
A
Date Setting
minimum temperature
The MIN symbol will appear.
To return to normal temperature and
humidity display, press
YEAR
Press
B
2
1
maximum temperature.
Year Setting
The MAX symbol will appear.
To return to normal temperature and
humidity display, press
NOTE: Min/Max readings are automatically cleared daily at 00:00
*
IN
Temperature and Humidity Trend
TREND
Local Temperature
The trend indicator shows the trend of the temperature and humidity in
the past half-hour interval.
Example:
The following trend
indicates that the
temperature is rising.
OUT %
TREND TREND
Remote Humidity
alternate on the LCD screen.
B
A
button placement
° ° ° °
C and F , 12 and
10
11
PAGE 2
MIN in Clock 1 mode to display MINIMUM
.
B
A
MIN again.
MAX in Clock 1 mode to display
MAXIMUM
MAX again.
Arrow Indicator
Trend
Rising Steady
PAGE 11
SETTING UP THE TRANSMITTER
* Set up the transmitter(s)
1
Remove battery cover
MOON PHASE
2
2 AA size batteries (included)
MONDAY
9
CLOCK1
Insert batteries into compartment,
3
IN
observing proper polarity
TREND
OUT 2
4
House code will blink for 8 seconds
TREND
Select House code (1-15) by pressing C/F
3 5
* If you have multiple transmitters for a single receiver,
set each transmitter to the
6
4 5
Press SET
1
7
Channel code will blink for 8 seconds
9
Select Channel code (1-4) by pressing C/F
7 8
6
* If you have multiple transmitters for a single receiver,
set each transmitter to a
1
9
Press SET
SET C/F
Temperature and humidity will appear and
10
alternate on the LCD screen
11
Select temperature display in C or F by pressing
8
12
Replace battery cover
WEATHER ICONS
Based on the temperature
IN
MIN
transmitter (Channel 1), the receiver will display the following weather
TREND
icons on the LCD screen.
OUT
MIN
TREND
SUNNY
IN
MAX
TREND
OR
OUT
MAX
TREND
About Freeze Warning:
!
The SNOW icon will blink to warn of 'freezing'.
!
Activated when Channel 1's temperature is between -1.9°C and 2.9°C.
!
The SNOW icon will appear solid if and when Channel 1's temperature
MOON PHASE
falls below -1.9°C.
MONDAY
CLOCK1
IN
NOTE:
TREND
OUT
TREND
!
When you first set up the weather station set, the weather icon shown on
the display will be CLOUDY.
!
The weather icon is based solely on the temperature and humidity data
collected from the remote transmitter Channel 1.
!
If Channel 1's slot is empty, the weather icon shown on the display will
Falling
always be CLOUDY.
before setting up the receiver
6
9
2
SET
1
same House code
12
4
7
different Channel code
10
° °
C/F
PAGE 3
and humidity data collected from the remote
FREEZE
CLOUDY RAIN SNOW
WARNING
OR
<flashing snow>
PAGE 12
5
C/F
8
11
3
1
1
1
1
%