Advertisement
Wireless NVR Specifications
G
GROUND
Rear View
The maximum number of cameras you can connect to your Wireless NVR will be determined by
the number of channels.
Audio Output – allows for the connection of an amplified speaker.
A
VGA Output – VGA output allows for a video connection. If the TV/Monitor
B
does not have an HDMI input but does have a VGA input, connect the VGA
cable from the VGA output port on the NVR to the VGA input port on your
TV/Monitor. (VGA cable not included)
HDMI Output – HDMI output allows for a video connection. If the TV/Monitor
C
has an HDMI input, connect the HDMI cable from the HDMI output port on
the NVR to the HDMI input port on your TV/Monitor.
RJ-45 (Ethernet) Port – The RJ-45 port will be used to connect the Wireless
D
NVR to your modem/router for remote viewing. Please note that your Wireless
NVR comes with built-in Wi-Fi for the cameras to transmit to the NVR.
However, you will need to manually connect the NVR to your modem/router
to remotely view on a smart device or PC/Mac
USB Ports – USB ports allow for the connection of a USB mouse and/or a
E
USB flash drive. You will connect the included USB mouse to assist you in
navigating the NVR's menu interface. You will connect a USB flash drive
to download video files from the NVR for long term storage or sharing.
Power Input – Power input is used to connect the included 12V DC
F
power supply.
NVR Antenna Mount – for installation of two included NVR antennas.
G
AUDIO
VGA
HDMI
OUTPUT
A
B
C
®
G
LAN
USB
POWER
12V
F
D
E
.
2
Advertisement
