Advertisement
Pairing a Replacement Wireless Camera
By default, each camera within your Wireless NVR kit comes pre-paired to the
Wireless NVR. Additionally, your wireless NVR has its own built-in Wi-Fi for
secure, uninterrupted, video transmission and recording. Pairing allows for the
wireless transmission coming from the camera to be detected by the Wireless
NVR. However, if you have a camera that needs to be replaced while under
warranty, the replacement camera will similarly need to be paired to the NVR.
To pair a replacement camera to your NVR, please use the below steps:
1
Power on the replacement camera
using the camera power adapter.
2
With the NVR connected to a
TV/monitor, right click on your
mouse and navigate to the Main
Menu using the options bar.
3
Go to the Camera Menu and
A
Select the Add Camera tab on
the left side of the menu.
The top portion of the screen
B
will list cameras that have been
found but not yet paired.
The bottom portion of the screen
C
will show all cameras that are
currently paired to the NVR.
15
B
A
C
Advertisement
