At Max Contents - Garrett AT Max Manual

AT Max Contents

Batteries
installed
Upper, lower stem (connected)
Searchcoil (with coil cover installed)
Nut, bolt,
mounting
washers
Manuals
Warranty card
If any part is missing, please contact Garrett Customer Service.
6
Garrett Metal Detectors
Control housing with
S-shaped stem
MS-3 wireless headphones
USB charging cable
Detector Assembly
Loosen lower camlock by turning it right (clockwise) while
holding the upper and lower stem assembly in front of you as
shown below. Extend lower stem, and press mounting washers
firmly into place.
Connect searchcoil to stem as shown, and hand-tighten wing
nut. Loosen upper camlock, depress the spring clip in the S-stem
(containing control housing), and insert the S-stem through the
upper camlock collar into the upper stem.
Note: The spring clip must be
engaged in the FIRST stem
opening in order to access
battery compartment.
1st pin position
7
AT Max
™