Display Test Procedure - AEG EBA6310X Service Manual

- DISPLAY TEST PROCEDURE

4
TEST PROCEDURE
When the appliance is in
stand-by mode (not
operating) and the main
switch however in position
I, open the service door
LOAD TEST and press simultaneously
MODE the icons MENU, 1 CUP
and HOT WATER for at
least 8 seconds until the
message "SELECT TEST"
is displayed. Then close
the service door and press
the MENU: the text
"DISPLAY TEST MODE"
is displayed.
When not operating, the appliance will automatically exit the procedure after 1 minute.
SOI 06.09 FV
CORRESPONDENCE BETWEEN ICON
AND OPERATING ELEMENT
icon
MENU
OK
TASTE
LIGHT
Hot water
2 cups
1 cup
Steam
8/10
position
BUTTON 0
BUTTON 1
BUTTON 2
BUTTON 3
The access to
display mode
sets back the
BUTTON 4
selected
language and
activates the first
BUTTON 5
setting.
BUTTON 6
BUTTON 7
BUTTON 8
BUTTON 9
BUTTON 10
599 72 00-47
NOTE