Power Lumbar - Chrysler 300 2015 User Manual

G E T T I N G S T A R T E D

Power Lumbar

• Push the switch forward to increase the lum-
bar support. Push the switch rearward to
decrease the lumbar support.
• Pushing upward or downward on the switch
will raise and lower the position of the
support.
Memory Seat
• The memory seat feature allows you to save
two different driver seating positions, driv-
er's outside mirror, adjustable brake and ac-
celerator pedals, power tilt and telescopic
steering column and radio station preset set-
tings. The memory seat buttons are located
on the driver's door panel.
• To set a memory position:
1. Cycle the vehicles ignition to the ON
position.
2. Adjust all memory profile settings.
3. Press and release the S (SET) button.
4. Press and release the 1 or 2 button within five seconds.
NOTE:
Before programming your RKE transmitters you must select the "Personal Settings Linked To Key
Fob" feature through the Uconnect® system. Refer to "Uconnect® Settings " in "Understanding
Your Instrument Panel" in the Owner's Manual on the DVD for further details.
• To program a Key Fob to the memory position:
1. Cycle the vehicles ignition to the OFF position.
2. Select the desired memory profile 1 or 2.
3. Press and release the S (SET) button on the memory switch, then within five seconds
press and release the 1 or 2 button accordingly.
4. Press and release the LOCK button on the RKE transmitter within 10 seconds.
• To recall the saved positions, press 1 or 2 on the memory switch or press UNLOCK on the
programmed RKE transmitter.
24
Power Lumbar Switch
Driver's Memory Buttons