Chrysler 300 2015 User Manual page 121

Phonebook
Uconnect® radios automatically downloads your phonebook from your paired phone, if this
feature is supported by your phone. Entries are updated each time that the phone is connected.
If your phone book entries do not appear, check the settings on your phone. Some phones require
you to enable this feature manually.
• Your phonebook can be browsed on your radio screen, but editing can only be done on your
phone. To browse, press the "Phone" button on the touchscreen, then the "Phonebook" button
on the touchscreen.
Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are shown at
the top of your main phone screen.
Voice Command Tips
• Speaking complete names (i.e; Call John Doe vs. Call John) will result in greater system
accuracy.
• You can "chain" commands together for faster results. Say "Call John Doe, mobile," for
example.
• If you are listening to available voice command options, you do not have to listen to the entire
list. When you hear the command that you need, push the
wheel, wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pushing the Phone button
"Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect® is
different than the audio system.
NOTE:
To access help, push the Uconnect® Phone
Press the display or push either the Phone
cancel the help session.
Voice Text Reply (Not Compatible With iPhone®)
Once your Uconnect® system is paired with a compatible mobile device, the system can
announce a new incoming text message, and read it to your over the vehicle audio system. You
can reply to the message using Voice Recognition by selecting, or saying, one of the 18
pre-defined messages.
Here's How:
1. Push the Uconnect® Phone button
will give the following prompt: "Please say the message you would like to send."
2. Wait for the beep and say one of the pre-defined messages. (If you are not sure, you can say
"help"). Uconnect® will then read the pre-defined messages allowed.
E L E C T R O N I C S
, then say a command for example -
button on the steering wheel and say "help."
or VR
and wait for the beep, then say "reply." Uconnect®
button on the steering
button and say "cancel" to
119