Trigger Out 1 / Trigger Out 2 - Marantz SR8012 Owner's Manual

Contents Connections

Trigger Out 1 / Trigger Out 2

Select the conditions for activating trigger out.
For details about how to connect the DC OUT jacks, see "DC OUT
jacks" (v p. 90).
n When setting for zone (MAIN ZONE / ZONE2 /
ZONE3)
Trigger out is activated through linkage to the power of the zone set to
"On".
n When setting for input source
Activate trigger out when the input source set to "On" is selected.
n When setting for HDMI monitor
Activate trigger out when the HDMI monitor set to "On" is selected.
On: Activate trigger on this mode.
– – –: Do not activate trigger on this mode.
Front panel Display
Playback Settings
Front Display
Makes settings related to the display on this unit.
o Dimmer
Adjust the display brightness of this unit.
Bright
(Default):
Dim:
Dark:
Off:
0 You can also adjust the display by pressing DIMMER on the main unit.
o Channel Indicators
Sets whether to use the input signal display or output signal display for
the channel indication on the display.
Input:
Output
(Default):
244
Rear panel
Tips
Normal display brightness.
Reduced display brightness.
Very low display brightness.
Turns the display off.
Uses the input signal display for the
channel indication on the display.
Uses the output signal display for the
channel indication on the display.
Remote Index
Appendix