Select the height, ceiling, or Dolby Atmos Enabled speaker location.
The layouts that can be selected differ depending on the combinations of "Assign Mode" and "Floor" - "Layout" in the menu. ("Assign
Mode" (v p. 211), "Floor" - "Layout" (v p. 213))
Height Speakers
Dolby Speakers
None
2ch
4ch
None
z1 This can be selected when "Assign Mode" is set to "11.1ch" or "9.1ch" in the menu.
z2 For the best Auro-3D experience Surround Height speakers are recommended, however you may substitute Rear Height speakers from a Dolby Atmos speaker setup
in place of Surround Height speakers.
z3 This can be selected when "Assign Mode" is set to "11.1ch" or "9.1ch" and "Floor" - "Layout" is set to "5ch & SB" in the menu.