Trust 245B Instructions Manual

Instructions when using for the first time
1. Collecting the required information
2. Uninstalling old drivers and devices
3. Installing the software
4. Connecting
5. Checking after the installation
6. Internet access
1 Introduction
This instruction manual is for users of the TRUST 245B SPEEDLINK ADSL WEB
MODEM. Basic knowledge of networks and dial-up connections is necessary to use this
device. The 245B Speedlink ADSL Web Modem is suitable for high-speed Internet
access, which is up to 200 times faster than a standard 56k modem. Depending on the
type of Internet subscription you have with your ISP, it is possible to achieve a download
speed of 8 Mbps and an upload speed of 1 Mbps
2 Safety
Carefully read the following instructions before use.
- The modem does not require any special maintenance. Use a slightly damp, soft cloth
to clean the modem.
- Do not use aggressive substances, such as white spirit, to clean the device. These
may harm the material.
- Do not submerge the device in liquid. This will damage the device. Do not use this
device near water.
- Make sure nothing is placed on the cable. Do not use this device in an area where the
cable can become worn or damaged as a result of people walking over it.
- Do not repair this device yourself.
3 Required for functionality
You need the following in order to connect to the Internet (if necessary, contact your
Internet Service Provider).
•
An activated ISDN ADSL line (Annex B - ADSL via an ISDN line).
•
An activated ADSL account.
•
A user name and a password if you use a PPPoA or PPPoE connection.
•
VPI / VCI values.
•
Network (Internet) protocol.
•
Encapsulation.
•
ADSL splitter (for simultaneous Internet and telephone use).
Note: Your ADSL modem will not work if you do not have the information above.
It is pointless to install the modem without having this information.
Note: The Trust 245B ADSL only works on an Annex B ADSL line.
TRUST 245B SPEEDLINK ADSL WEB MODEM
Chapter
!
(4)
(5)
(6.1/6.2)
(6.3)
(7)
(8)
U K
1