Page 1
Trust 56K USB Modem TRUST 56K USB MODEM Instruction Manual Version 1.0...
Page 2
Trust 56K USB Modem Thank you Thank you very much for purchasing this product from the Trust range. We wish you hours of fun with it. Please read this manual carefully before using the product. Registration Register your purchase now at the Trust Internet site, www.trust.com...
Trust 56K USB Modem 1. Introduction This manual is intended for users of the Trust 56K USB Modem. Some knowledge of computers is necessary to install this product. If you have any questions, please contact one of the Trust Customer Care Centers.
Trust 56K USB Modem 2. Safety Read the following carefully before use: 2.1 General The modem should be connected to a standard analogue telephone line and not to a digital telephone system or network, as this may result in damage or injury.
Trust 56K USB Modem Connect the USB cable (Figure 2, plug 2) to the USB modem (Figure 1, connection C). Figure 2: Connecting the USB Continue with chapter 3.2 if you use Windows 98 or chapter 3.3 if you use Windows 2000.
Page 7
Trust 56K USB Modem Click on 'Next'. Figure 5 will appear. Figure 5: Specifying a driver location Click on 'Specify a location', so that a checkmark appears in the box. Type: 'D:\WIN98' in the command line. Click on 'Next'. The window shown in Figure 6 will pop up.
Trust 56K USB Modem Click on 'Finish'. Figure 8 will appear. Figure 8: Country selection Select the country in which you are located. If your country is not included here, select 'CTR21EUROPE'. If you use a PBX telephone system, place a tick in the check-box in front of the text.
Page 9
Trust 56K USB Modem Click on 'Next' to continue. Figure 10 will appear. Figure 10: Searching for the best driver Choose ‘Search for a suitable driver for my device (recommended)’ and click on ‘Next’. Figure 11 will appear. Figure 11: New hardware detected Place a tick in the third option 'Specify a location'.
Trust 56K USB Modem Give the location as ‘d:\win2000’ and click on ‘OK’. Figure 13 will appear. Figure 13: Driver found Click on 'Next'. A number of files will be copied. When completed, Figure 14 will appear. Note: You may first receive a window displaying a warning that no digital signature has been found in the driver.
Insert the CD-ROM into your CD-ROM drive. Select 'Run' from the Start menu. Type [D:\SETUP.EXE] and click on ‘OK’ (see Figure 16) to start the Trust Software Installer. Figure 16: Starting set-up Select the language you wish to use. Figure 17 will appear.
Click on ‘Start’, ‘Settings’ and select ‘Control Panel’. Double click on the ‘Add/Remove Programs’ icon. A new window will appear. Scroll through this list to ‘Uninstall Trust 56K USB Modem’ and click on ‘Add/Remove’. Figure 18 will appear. Figure 18: Uninstalling the modem...
Trust 56K USB Modem Figure 19: Uninstalling the modem Select the first option to restart your computer or the second option to shut down your computer. Click on 'OK'. The modem has now been successfully uninstalled. 6. Troubleshooting This chapter is intended for solving any problems. If you cannot find the solution in this chapter, contact the Trust Customer Care Center.
You will be automatically informed of developments to your product and of other Trust products. You will also have the chance to win some spectacular prizes. If you still have any problems after trying these solutions, please contact one of the Trust Customer Care Centers.
9. Conditions for 56K connection Under certain circumstances your Trust 56K USB can receive data at a speed of a maximum of 56,000 bits per second. If it is not possible to connect at 56,000 bps, the modem will switch back to a lower speed automatically.
Trust 56K USB Modem Inhabitants of the Netherlands should contact: Dutch Office From: Internet www.trust.com 9:00 - 17:00 E-mail support-nl@trust.com 078-6543299 Tel. 0800-BELTRUST (=0800-23587878) of 078- 549999 Inhabitants of all other European countries should contact: European Head Office From: Internet www.trust.com...
Page 17
Trust 56K USB Modem Command Function Country code Low speaker volume Low speaker volume Medium speaker volume High speaker volume Speaker always off Speaker on until carrier detected Speaker always on Speaker off during dialing, on until carrier detected Auto Mode disabled. Modem handshake speed specified by the %Bn command Auto mode enabled.
Need help?
Do you have a question about the 56K and is the answer not in the manual?
Questions and answers