Makita HM1140C Instruction Manual page 14

MAKITA LIMITED ONE YEAR WARRANTY
Warranty Policy
Every Makita tool is thoroughly inspected and tested before leaving the factory. It is warranted to
be free of defects from workmanship and materials for the period of ONE YEAR from the date of
original purchase. Should any trouble develop during this one-year period, return the COMPLETE
tool, freight prepaid, to one
o f
Makita's Factory or Authorized Service Centers. If inspection shows
the trouble is caused by defective workmanship or material, Makita
will
repair (or at our option,
replace) without charge.
This Warranty does not apply where:
0
repairs have been made or attempted by others:
repairs are required because
of
normal wear and tear:
0
The tool has been abused, misused or improperly maintained
;
0
alterations have been made to the tool.
IN NO EVENT SHALL MAKITA BE LIABLE FOR ANY INDIRECT, INCIDENTAL OR CON-
SEQUENTIAL DAMAGES FROM THE SALE OR USE OF THE PRODUCT. THlS DISCLAIMER
APPLIES BOTH DURlNG AND AFTER THE TERM OF THlS WARRANTY.
MAKITA DlSCLAlMS LIABILITY FOR ANY IMPLIED WARRANTIES, INCLUDING IMPLIED
WARRANTIES OF "MERCHANTABILITY" AND "FITNESS FOR A SPECIFIC PURPOSE,"
AFTER THE ONE-YEAR TERM OF THIS WARRANTY.
This Warranty gives you specific legdl rights, and you may also have other rights which vary from
state to state. Some states do not allow the exclusion or limitation of incidental or consequential
damages,
so
the above limitation or exclusion may not apply to you. Some states do not allow
limitation on how long an implied warranty lasts,
so
the above limitation may not apply to you.
Makita Corporation
3-11 -8,
Sumiyoshi-cho,
Anjo, Aichi
446-8502
Japan
884214 - 069
PRINTED IN JAPAN
1999 - 7 -
N