Makita HM1140C Instruction Manual page 11

ACCESSORIES
CAUTION:
These accessories or attachments are recommended for use with your Makita tool specified in this
manual. The use of any other accessories or attachments might present a risk of injury
to
persons.
The accessories or attachments should be used only in the proper and intended manner.
*Cold chisel (For gouging)
*Bull point (For demolishing)
26 mm (1
")
x 300 mm (1 1-7/8")
26 mm (1
" )
x 450 mm (1 7-3/4")
Part No. 7981 39-8
300 mm (11-7/8") Part No. 798146-1
450 mm (17-3/8") Part No. 798147-9
Part
No.
798140-3
Scaling chisel
50 mm (2") x 300 mm (1 1-7/8")
Part
No. 798141-1
Grooving chisel
22 mm (7/8") x 300 mm (1 1-7/ 8")
26 mm (1
")
x 300 mm (1 1-7/8")
Part No. 798142-9
Part No. 798143-7
Clay spade
105 mm (4-1/8") x 400 mm (1 5-3/4")
Part
No. 798148-7
ORammer (For tamping, ramming, etc.)
140 mm (5-1/2") Part No. 798149-5
Bushing tool (For surfacing concrete)
67 mm (2-5/8")
x 300 mm (1 1-7/8")
Part No
7981 44-5
-
Hammer grease (30 g)
Part No 181 490-7
Safety goggle
Part No. 191 686-2
Plastic carrying case
11