Install The Cable (S - TELEVAC VacuGuard series User Manual

SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
CHAPTER 4
The VacuGuard is equipped to power and display the output of either Hastings type DV4,
DV6 or Televac 2A series thermocouple sensors. Two modular (RJ Type) cable ports are
provides for this purpose on the rear of the instrument. A DV4/DV6 cable will fit into the
left hand port, while one of the two type 2A cables will fit the right hand port. Note that
while the modular plugs are of different sizes, the modular plug of the 2A cable will fit
either port, but will only work properly in the correct right hand port. The DV4/DV
modular plug will only fit the left hand port.
If you are planning to use both sensor types, be sure to install only one cable at a
time. Install a cable now.
SUNSTAR传感与控制 http://www.sensor-ic.com/ TEL:0755-83376549 FAX:0755-83376182 E-MAIL:szss20@163.com
Install the Cable(s)
TELEVAC