System - D-Link DAP-1160L User Manual

Section 3 - Configuration
Save to Local
Use this option to save the current access point
Hard Drive:
configuration settings to a file on the hard disk of
the computer you are using. Click the Save.button.
You will then see a file dialog where you can select
a location and file name for the settings.
Upload from
Use this option to load previously saved access
Local Hard Drive:
point configuration settings. Click Browse to find
a previously saved configuration file. Then, click the
Upload.Settings button to transfer those settings
to the access point.
Restore to
This option will restore all configuration settings
Factory Default:
back to the settings that were in effect at the time
the access point was shipped from the factory.
Any settings that have not been saved will be lost,
including any rules that you have created. If you
want to save the current access point configuration
settings, use the Save button above.
Note: Restoring the factory default settings will not
reset the Wi-Fi Protected Status to Not Configured.
Reboot the
Click to reboot the access point.
Device:
Remove
Click to remove the language pack if installed.
Language Pack:
D-Link DAP-1160L User Manual

System

31