Accessories; K-3800 Drum Option; Installing K-3800 Drum; Using K-3800 Drum - RIDGID K-6200 Manual

Drain cleaning machine
Hide thumbs Also See for K-6200:
Table of Contents

Advertisement

Accessories

Only the following RIDGID products have
WARNING
been designed to function with the K-6200 Drain Cleaning
Machine. Other accessories suitable for use with other
tools may become hazardous when used on the K-6200.
To prevent serious injury, use only the accessories listed
below.
Catalog No.
Description
• 49032
Front Guide Hose Assembly
• 95797
Lifting Hook
• 95792
Swivel Loading Wheel Assembly
• 95802
K-6200 Drum Assy. w/
• 95807
K-3800 Drum Assy. w/6200 Adapters
• 95822
K-3800 to K-6200 Adapter Kit Only
• 59982
Cable Rust Inhibitor 1 Qt.
• 59987
Cable Rust Inhibitor 1 Gal.
NOTE! See page 5 for listing of cables and tools for the
K-6200. Consult a Ridge tool Catalogue for listing
of tools and cables to be used with the K-3800
drum.

K-3800 Drum Option

Installing K-3800 Drum

1. Insert rear adapter into gear box in back of drum, in-
serting "O" ring end into drive gear. "O" ring will hold
adapter in place while installing drum. (Figure 15)
Figure 15 – K-3800 Drum with K-6200 Adapters
2. Place front hex adapter on front nosepiece of guide
tube assembly and tighten wing nut.
Find Quality Products Online at:
5
/
" Pigtail
8
GlobalTestSupply
www.
K-6200 Drain Cleaning machine
3. Slide drum assembly into rear adapter on gear box.
4. Nest hex head front adapter onto front mounting block.
5. Attach AUTOFEED by sliding the assembly onto the
cable. Slide assembly onto front support and align with
hex adapter. Tighten wing nuts.
Using the K-3800 Drum
1. The K-3800 drum should only be used to clean drain
lines 2" to 4" in diameter.
Only
1
/
" diameter cable is recommended
WARNING
2
for use in this K-3800 option. Use of smaller diameter ca-
bles may result in kinking and breakage.
2. Follow the same Operating Instructions previously
outlined when cleaning drain. To use the AUTOFEED,
Feed knob must be turned until top bearing makes
contact with the cable. Turn one full additional turn but
do not over-tighten.
Figure 16 – Lifting Hook
.com
sales@GlobalTestSupply.com
13

Advertisement

Table of Contents
loading

Table of Contents