GE WR30X10093 Installation Instructions Manual page 5

STEP 5 ATTACH THE ORIGINAL
PLASTIC STRIPPER PLATE TO NEW
ICEMAKER
towards mold body as you pull it onto the post.
the end with the slot in the housing.
STEP 6 MOUNT THE ICEMAKER
opening. Secure the icemaker to the bracket with the
two screws and install as shown.
Bracket
Fill Tube
(Appearance may vary)
NOTE:
Make Sure:
back of the icemaker.
Fill Cup
Mounting
Tabs
STEP 7 PLUG IN THE ICEMAKER
power cord plug into the
socket, making sure that
the prongs and holes are
matched. Press the plug
firmly into the socket.
by clipping the restraints
onto each side of the
plug. Make sure the
restraints click into place
and the power cord is
firmly in the socket.
NOTE:
on the back of the icemaker.
STEP 8 COMPLETE THE
INSTALLATION
plugged in.
It may take several hours for the freezer to reach
the selected temperature and for ice production to
begin.
Congratulations! You have completed the installation of
issues with the icemaker or your refrigerator, please call
1-800-GE-CARES (1-800-432-2737) for additional help
or information.
Thank you for choosing GE Appliances.
5
31-49143-1