Precor C962i Owner's Manual page 43

C O M M E R C
Diagram 2
Installing the lower
section of the handrail.
Handrail option
Rubber washer
Bolt
End clamp
Siderail
Locknut
6. Slide an end clamp onto the base of the handrail. See Diagram 2. Place the
large rubber washer between the end clamp and the siderail. Insert a bolt
through the clamp, handrail, rubber washer, and siderail. Place the locknut
on the opposite end of the bolt with the star washer facing the frame. You
will need to place your hand under the treadmill frame to hold the locknut in
place while you tighten the bolt securely.
7. Return to the upper handrail clamps and securely tighten the bolts.
Note: If you are installing both the right and left handrail option, repeat steps
1 through 7 to attach the handrail to the opposite side of the treadmill.
Diagram 3
Treadmill with both
handrails installed.
Diagram 3 shows the completed assembly of a treadmill with both handrail
options installed.
I A L P R O D U C T S D I V I S I O N