Precor C952i Product Owners Manual page 65

Test the heart rate touch-sensitive grips on the C954i,
C956i, or C966i.
a. Turn the unit ON. The Precor banner appears in the
display.
b. Face the display and straddle the running belt.
c. Grasp both touch-sensitive handrail grips.
d. Look at the Heart Rate display. The letters Hr should
be blinking. After a few seconds, a number appears
indicating your heart rate.
Note: If the display remains blank, turn the unit OFF
and recheck the cable connection on the lower board.
Refer to the Product Owner's Manual for trouble-
shooting tips. Instructions regarding the chest strap
are also found in the Product Owner's Manual.
e. When the test is completed, turn the treadmill OFF
and continue with step 14.
Commercial Treadmill Assembly Guide
Replace the hood and secure it using four
buttonhead screws (A) and four washers (B).
Wrench tighten.
Tighten all mounting screws.
a. Start at the front of the unit and alternately tighten
the four front panel screws.
b. Wrench tighten the four side bracket upright
support screws.
c. Wrench tighten the four screws that secure the
display console to the upright supports.
d. Wrench tighten all eight handrail screws.
7