Table of Contents
Advertisement
C
O
M
M
E
R
C
Press SELECT once again and the Error Log appears. The most recent error log
appears first and scrolls across the display. If the words, NO ERRORS appear, no
errors have been recorded.
Up to ten error codes can be recorded and viewed in the following format.
Most recent error
1: ER33
Error code
Note: To clear (delete) the error log, press the QuickStart key for at least four
seconds while the message HOLD QUICKSTART TO CLEAR ERROR LOG scrolls
across the display. If the QuickStart key is released before the message finishes
scrolling, then the display returns to the previous error code. If you continue to press
the QuickStart key until the message finishes scrolling, then prompts appear on the
display and let you know when the error messages have been deleted from memory.
Important: You cannot retrieve the error log once you have deleted it.
To return to the PRECOR banner, press RESET, SELECT, or the red Stop button.
I
A
L
P
R
O
D
The number of hours that the treadmill has been
in use when the error occurred
AT
12,345,678 MILES
Odometer reading at the time the error occurred
U
C
T
S
D
I
V
1,714 HOURS
I
S
I
O
N
page 25
Advertisement
Table of Contents
