Replacement Parts; Wiring And Piping; Maintenance Procedures - Honeywell EXCEL 5000 Installation Instructions Manual

EXCEL 5000™ SYSTEM STYLED CABINET RINGS AND SUBPANELS
TAMPER
SWITCH
Fig. 9. Tamper Switch location and installation.

WIRING AND PIPING

All wiring must conform to applicable local codes, ordinances
and regulations.
Fig. 4 and 5 show conduit knockout sizes and locations for
small-sized and full-sized Ring.
95-7487—1
LOCK
WASHERS
PLUNGER
LOCKNUT
PLUNGER
SCREW
SCREWS
RING
C7086

REPLACEMENT PARTS

Table 1 lists replacement parts for the Styled Cabinet Ring
and Subpanel.
Table 1. Replacement Parts List.
Part No.
14507358-001 Subpanel, Small-Sized Controller
CPU.
14507358-002 Subpanel, Small-Sized ACP No. 1. 1, 3
14507358-003 Subpanel, Small-Sized ACP Panel. 1, 3
14507354-001 Subpanel, Full-Sized Controller
CPU.
14507354-002 Subpanel, Full-Sized ACP No. 1.
14507354-003 Subpanel, Full-Sized ACP.
14507305-001 Ring, Small Sized.
14507305-002 Ring, Full Sized.
14505159-001 Tamper Switch.

MAINTENANCE PROCEDURES

The equipment mounted in this enclosure must be maintained
in accordance with the system documentation and procedures
and practices contained in applicable NFPA and UL
standards. For service, contact your local Honeywell Home &
Building control office as listed in the phone book or contact a
regional office as shown at the end of this document.
6
See Fig.
Description
1, 3
1, 3
1, 3
1, 3
1, 3
1, 3
9
X