Front Seats - Chrysler 200 2015 User Manual

NOTE:
The head restraints should only be removed by qualified technicians, for service purposes only.
If either of the head restraints require removal, see your authorized dealer.
Do not place items over the top of the Active Head Restraint, such as coats, seat covers or
portable DVD players. These items may interfere with the operation of the Active Head
Restraint in the event of a collision and could result in serious injury or death.
Rear Head Restraints
The rear outboard head restraints have three positions UP, MID and DOWN. The center head
restraint has only two positions, Up and Down. When the center seat is being occupied the head
restraint should be in the raised position. When there are no occupants in the center seat the head
restraint can be lowered for maximum visibility for the driver.
To raise the head restraint, pull upward on the head restraint. To lower the head restraint, press the
push button, located at the base of the head restraint, and push downward on the head restraint.

FRONT SEATS

Power Seats
The power seat switches are located on the
outboard side of the front seat cushions.
The power seat switch controls forward, rear-
ward, up and down adjustments.
The recline switch controls the angle of the
seatback.
• Press the switch forward or rearward and the
seatback will move in either direction.
The power lumbar switch controls the amount
of lumbar support needed.
• Push the switch forward to increase the lum-
bar support.
• Push the switch rearward to decrease the
lumbar support.
• Pushing upward or downward on the switch
will raise and lower the position of the support.
G E T T I N G S T A R T E D
WARNING!
1 — Power Seat Switch
2 — Recline Switch
3 — Power Lumbar Switch
Power Seat Switches
21