Chrysler 200 2015 User Manual page 131

Phonebook
• Uconnect® radios automatically downloads your phonebook from your paired phone, if this
feature is supported by your phone. Entries are updated each time that the phone is
connected. If your phone book entries do not appear, check the settings on your phone. Some
phones require you to enable this feature manually.
• Your phonebook can be browsed on your radio screen, but editing can only be done on your
phone. To browse, press the "Phone" button on the touchscreen, then the "Phonebook" button
on the touchscreen.
• Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are shown
at the top of your main phone screen.
Voice Command Tips
• Using complete names (i.e; Call John Doe vs. Call John) will result in greater system accuracy.
• You can "chain" commands together for faster results. Say "Call John Doe, mobile", for example.
• If you are listening to available voice command options, you do not have to listen to the entire
list. When you hear the command that you need, press the
wheel, wait for the beep and say your command.
Changing The Volume
• Start a dialogue by pressing the Phone button
"Help".
• Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable level
while the Uconnect® system is speaking. Please note the volume setting for Uconnect® is
different than the audio system.
NOTE:
To access help, press the Uconnect® Phone
Press the display or press either
session.
Voice Text Reply (Not Compatible With iPhone®)
Once your Uconnect® system is paired with a compatible mobile device, the system can announce a
new incoming text message, and read it to your over the vehicle audio system. You can reply to the
message using Voice Recognition, by selecting, or saying one of the 18 pre-defined messages.
• Here's How: Press the Uconnect® Phone button
Uconnect® will give the following prompt: " Please say the message you would like to send."
Wait for the beep and say one of the pre-defined messages. (If you are not sure, you can say
"help"). Uconnect® will then read the pre-defined messages allowed. As soon as you hear the
message you would like to send, you can interrupt the list of prompts by pressing the
Uconnect® phone button and saying the phrase. Uconnect® will confirm the message by
reading it back to you. Then press the Phone button and say "Send."
E L E C T R O N I C S
, then say a command for example -
button on the steering wheel and say "help."
or button and say "cancel" to cancel the help
and wait for the beep, then say "reply."
button on the steering
129