Chrysler 200 2015 User Manual page 100

E L E C T R O N I C S
Complete The Pairing Procedure
• When prompted on the phone, verify with radio password shown on the Uconnect® Screen.
• If your phone asks you to accept a connection request from Uconnect®, select "Yes." If
available, check the box telling it not to ask again – that way your phone will automatically
connect each time you start the vehicle.
Select The Mobile Phone's Priority Level
• When the pairing process has successfully completed, the system will prompt you to choose
whether or not this is your favorite phone. Selecting "Yes" will make this phone the highest
priority. This phone will take precedence over other paired phones within range. Only one
phone can be paired at a time.
• You are now ready to make hands-free calls. Press the "Uconnect® Phone" button on your
steering wheel to begin.
Making A Phone Call
• Press the Uconnect® Phone button
• After the BEEP, say "dial" then the number (or "call" then the name as listed in your phone; see
Phonebook).
NOTE:
You can also initiate a call by using the touchscreen on the Phone main screen.
Receiving A Call – Accept (And End)
• When an incoming call rings/is announced on Uconnect®, press the Phone button
• To end a call, press the Hang Up or Phone button
Mute (Or Unmute) Microphone During Call
• During a call, press the "Mute" button on the Phone main screen to mute and unmute the call.
Transfer Ongoing Call Between Handset And Vehicle
• During an on-going call, press the "Transfer" button on the Phone main screen to transfer an
on-going call between handset and vehicle.
Common Phone Commands (Examples)
• "Call John Smith"
• "Call John Smith mobile"
• "Dial 1 248 555 1212"
• "Call Emergency"
• "Call Towing Assistance"
• "Redial"
98
.
.
.