Emergency Power System Stop; Emergency Towing; Tire Pressure Monitoring System (Tpms) - Honda Clarity Plug In Hybrid 2018 Owner's Manual

HANDLING THE UNEXPECTED

Emergency Power System Stop

The PoWer button may be used to stop the power system due to an emergency
situation even while driving. If you must stop the power system, choose one of
the following operations:
• Press and hold the PoWer button for two seconds, or
• Firmly press the PoWer button three times.
The steering wheel will not lock. However, because turning off the power
system disables the power assist the power system provides to the steering
and braking systems, it will require significantly more physical effort and time to
steer and slow the vehicle. Use both feet on the brake pedal to slow down the
vehicle and stop immediately in a safe place.
The gear position automatically changes to (P) after the vehicle comes to a
complete stop. Then, the power mode changes to veHICLe oFF.
NOTICE
Do not press the button while driving unless it is absolutely necessary for the
power system to be switched off.

Emergency Towing

Call a professional towing service if you need to tow your vehicle.
This vehicle requires a flat-bed tow vehicle: The operator loads your vehicle
on the back of a truck.
NOTICE
Trying to lift or tow your vehicle by the bumpers will cause serious damage.
The bumpers are not designed to support the vehicle's weight.
Improper towing such as towing behind a motorhome or other motor vehicle
can damage the transmission.
122 |

Tire Pressure Monitoring System (TPMS)

Monitors the tire pressure while you are driving.
If your vehicle's tire pressure becomes
significantly low, the low tire pressure
indicator comes on and a message
appears.
What to Do
n
Stop your vehicle in a safe place.
Check the tire pressure and adjust the
pressure to the specified level on the
label on the driver's doorjamb.
TPMS Calibration
n
After you inflate, change, or rotate any of the tires, recalibrate the system.
The calibration process requires approximately 30 minutes of cumulative
driving at speeds between 30-65 mph (48-105 km/h).
Calibrate the system from the customized features screen on the audio/
information screen with the vehicle power mode oN.
Use the touchscreen to make and
enter selections.
1. From the HoMe screen, select
Settings.
2. Select vehicle, then select TPMS
Calibration.
3. Select either Cancel or Calibrate
The screen will return to the customized feature screen once calibration is
complete. If the "Calibration Failed to Start" message appears, repeat steps
2-3. The calibration process finishes automatically
NOTICE
Driving on an extremely underinflated tire can cause it to overheat. An
overheated tire can fail. Always inflate your tires to the specified pressure.
HANDLING THE UNEXPECTED
| 123