Remote Climate Control; Starting To Drive; Using The Remote Transmitter - Honda Clarity Plug In Hybrid 2018 Owner's Manual

DRIVING

Remote Climate Control

Start the climate control system using the remote transmitter before you enter
the vehicle.
Lock
Button
Turn On the Climate Control System
n
Press the Lock button, then press and hold the climate button within 5
seconds.
Turn Off the Climate Control System
n
Press and hold the climate button.
94 |
Climate
Button

Starting to Drive

Turn on the power mode and start the power system to begin driving.
Before Starting the Power System
n
Make sure the parking brake is
applied. Keep your foot firmly on the
brake pedal when starting the power
system.
The power system is harder to start
in cold weather. When starting the
power system in cold weather, turn
off all electrical accessories such
as the lights, climate control system,
and rear defogger in order to reduce
12-volt battery drain.
U.S. models
If the temperature of the High voltage battery drops below approximately
-22°F ( -30°C), the power system will not start, the High voltage battery will
not operate and, as a result, the vehicle will not start. Store the vehicle in
a garage or take another measure to insure that temperature of the High
voltage battery does not fall below this temperature. If necessary, consult
an authorized Honda Clarity Plug-In Hybrid dealer.
Canadian models
If the temperature of the High voltage battery drops to approximately –22°F
(–30°C) or below, the power system will not start. Wait for the High voltage
battery to warm up or move the vehicle to a warmer location. Note: plugging
the vehicle in will not help in this case. Store the vehicle in a garage or take
another measure to insure that temperature of the High voltage battery does
not fall below this temperature. If necessary, consult an authorized Honda
Clarity Plug-In Hybrid dealer.
DRIVING
Electric Parking
Brake Switch
| 95