Table of Contents
Advertisement
Diagnostic tools
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the Hewlett Packard Enterprise website (http://www.hpe.com/info/qs).
UEFI System Utilities
The UEFI System Utilities is embedded in the system ROM. Its features enable you to perform a wide
range of configuration activities, including:
•
Configuring system devices and installed options.
•
Enabling and disabling system features.
•
Displaying system information.
•
Selecting the primary boot controller or partition.
•
Configuring memory options.
•
Launching other preboot environments.
HPE servers with UEFI can provide:
•
Support for boot partitions larger than 2.2 TB. Such configurations could previously only be used for
boot drives when using RAID solutions.
•
Secure Boot that enables the system firmware, option card firmware, operating systems, and software
collaborate to enhance platform security.
•
UEFI Graphical User Interface (GUI)
•
An Embedded UEFI Shell that provides a preboot environment for running scripts and tools.
•
Boot support for option cards that only support a UEFI option ROM.
Selecting the boot mode
This server provides two Boot Mode configurations: UEFI Mode and Legacy BIOS Mode. Certain boot
options require that you select a specific boot mode. By default, the boot mode is set to UEFI Mode. The
system must boot in UEFI Mode to use certain options, including:
•
Secure Boot, UEFI Optimized Boot, Generic USB Boot, IPv6 PXE Boot, iSCSI Boot, and Boot from
URL
•
Fibre Channel/FCoE Scan Policy
NOTE:
The boot mode you use must match the operating system installation. If not, changing the boot
mode can impact the ability of the server to boot to the installed operating system.
Prerequisite
When booting to UEFI Mode, leave UEFI Optimized Boot enabled.
48
Diagnostic tools
Hide quick links:
Advertisement
Table of Contents
