Getting Started - Blueant Q1 User Manual

Getting Started

To get started, you need to pair the Q1 with your phone.
1. Put the Q1 in your ear.
You can wear the Q1 in either ear, but for the best results:
• Wear it in your right ear.
• Angle the headset so that it points towards your mouth (this will help the Q1's microphones
to pick up your voice).
2. Turn the Q1 on by holding down
(about 3 seconds).
• If this is the first time you have used your Q1, it will automatically go into pairing mode, and
you will hear the voice prompts start to take you through the pairing process.
• If the pairing process does not start automatically, click
the Q1 to ask you to "Say A Command" and then say the command "Pair Me" to go into
pairing mode.
3. Follow the voice prompts to pair the Q1 with your phone.
When the pairing process finishes, you are ready to start using the voice commands to control your
Q1. See "Use your Voice to Control the Q1" (page 8)
voice commands.
(the BlueAnt button) until you hear the welcome message
for more information about how to use the
(the BlueAnt button), wait for
6