Blueant Q1 User Manual page 28

Function Button
Save the last Vol-
incoming call in
one of the Q1's
speed dials
Hold a call Vol+
and answer
a second
incoming call
End the current Vol-
call and answer
a second
incoming call
Put the current Vol+
call on hold and
switch to the
call on the other
line
Call Conference
Reset the Q1
Vol+ and
Vol-
How Long When
Hold for 1 Standby
second
Hold for 1 3 Way Call
second
Hold for 1 3 Way Call
second
Hold for 1 3 Way Call
second
Hold for 3 3 Way Call
seconds
Click all Idle
three
buttons
together
Notes
For more information about storing
numbers in the Q1's speed dials, see
"Setting Up Speed Dials" (page
This function is only available if your
phone and phone network supports 3
way calling.
This function is only available if your
phone and phone network supports 3
way calling.
This function is only available if your
phone and phone network supports 3
way calling.
This function is only available if your
phone and phone network supports 3
way calling.
This function is only available when
the headset is in Idle mode. It is not
available when the headset is in Standby
mode, so you will need to disconnect
from all paired mobile devices before
using this button combination.
16).
28