NetComm Wireless NF17ACV Setup Manual page 2

4 The Access Control -- Services page will open:
Tick the  enable checkbox of the WAN option for the HTTP Service.
5
6 This is highly recommended to change the Port to something other than 80. This is just a safety measure and part of
best practices. Please be informed that changing the port number will apply in both the LAN and WAN sides.
7 Click the Apply/Save button.
You should now be able to access your NF17ACV locally, via the address:
http://<your LAN IP address>:<port number>
You should now be able to access your NF17ACV from internet, via the address:
http://<your WAN IP address>:<port number>
You can find your external (public) IP address by going to www.ipmonkey.com or by clicking on WAN option under
Device Info.
2 of 4
© NetComm Wireless 2017
Remote Administration Setup Guide