Repeater Ap Setup - Hawking HPOW5CM User Manual

Site Survey:
ESSID:
Authentication
Click Next

3-4-4 Repeater AP Setup

This allows you to create a repeater AP and set SSID to your wireless network.
This page is used to define the parameters for the wireless LAN clients
ESSID:
Authentication:
Press this button for the device to automatically scan for wireless networks.
After it scans, a list of wireless networks in the area will appear. Click "Setup" to
connect to this network.
After you click setup, the name of the wireless network you wish to connect to
will appear here. You can also manually enter the name or click on "Site Survey"
for the device to scan for wireless networks.
After you click setup, the security type of the wireless network you wish to
connect to will appear here. Type in your key to connect.
This is the wireless broadcast name. By default, it is 'Hawking_HPOW5CM' but
you can change it to whatever you want.
Choose your type of security (Hawking recommends AUTO (WPA or WPA-2PSK))
42