Quick Setup; Hardware Installation - Hawking HOW17ACM Quick Installation Manual

Outdoor wireless-1750ac managed ap pro
Hide thumbs Also See for HOW17ACM:
Table of Contents

Advertisement

4

Quick Setup

a. To change the SSID of your access point's 2.4GHz wireless network, go to
'2.4GHz Basic Settings'. Enter the new SSID for your 2.4GHz wireless network
in the "SSID1" field". The default 2.4GHz SSID is
'Hawking_HOW17ACM_2.4GHz'.
c. To change the access point's LAN IP address, go to 'LAN-side IP Address'.
Enter the IP address settings you wish to use for your access point. You can
use a dynamic (DHCP) or static IP address, depending on your network
environment. Click 'Next' to save the changes and to go to the security
settings.
Click 'Apply' and the device will now reset and save your settings. The basic settings of your access point are now configured!
5

Hardware Installation

Connect a PoE injector or PoE switch to the
access point's LAN port using an Ethernet
cable. Then connect the PoE to the LAN.
6
Enjoy your Hawking HOW17ACM Wireless Network!
For more information on the different settings, refer to the full manual located on the CD. You can also download it from www.hawkingtech.com.
Have questions? Feel free to contact our 24 hour Technical Support Line at 1.888.202.3344 or email us at techsupport@hawkingtech.com
Tel: 1.888.202.3344
Technical Support
HOW17ACM- QIG 2016.12.19
Attach the HOW17ACM bracket to the back of the unit. The HOW17ACM supports Wall Mounting or Pole
Mounting.
Vertical Bracket Installation
Horizontal Bracket Installation
E-mail: techsupport@hawkingtech.com
© 2017 Hawking Technologies, Inc. All rights reserved. All trademarks herin are the property of their respective owners. Apple, Mac, iPad, and iPhone are registered trademarks of Apple Computer, Inc. No Affiliation implied or expressed.
b. Go to '5GHz Basic Settings' and repeat step 1 for the access point's 5GHz AC
wireless network. The default 5GHz SSID is 'Hawking_HOW17ACM_5GHz'
d. To configure the security of your access point's wireless network, go to
'2.4GHz Wireless Security Settings/5GHz Wireless Security Settings'. Select
an 'Authentication Method' and enter a 'Pre-shared Key' or 'Encryption Key'
depending on your choice, then click 'Apply'. Hawking recommends at least
WPA/WPA2 security.
Wall Mount Installation
Pole Mount Installation
www.hawkingtech.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HOW17ACM and is the answer not in the manual?

Questions and answers

Table of Contents