Features; Specifications - Precision Power DCX 600.4 Owner's Manual

FEATURES

Advanced Instrumentation Input Stage
TC-X Crossover 12dB/Octave; HP/LP/FULL; 30-4kHz Crossover
Adaptive PWM Power Supply (DCX 300.4, DCX 600.4, DCX 800.5)
AP-IV Protection Circuity
Fully Regulated PWM Power Supply (DCX 1000.4)
Fully Complementary Darlington Output Stage
Forced Air Thermal Management (DCX 1000.4)
QBASS TM Bass Boost (DCX 300.4)
QBASS Plus TM Bass Boost (DCX 600.4, DCX 800.5, DCX 1000.4)
High Voltage Input Capability with -12dB Attention Switch
Gold Plated RCA Input and Output Connectors
PowerLock
TM Speaker and Power Wire Connectors
Mixed Mono/Stereo Operation
2 Yr Warranty if installed by an Authorized PrecisionPower Dealer

SPECIFICATIONS

Power Ratings
MODEL 4ohm STEREO
DCX 300.4 4 X 50
DCX 600.4 4 X 75
DCX 1000.4 4 X 125
DCX 800.5 4 X 50
4ohm MONO
5/Ch. 1 X 200
All power ratings given above are tested at 12.5V; 4 ohms; 20Hz - 20kHz.
General Specifications
Frequency Response
Power Bandwidth
Total Harmonic Distortion
S/N Ratio
Input Topology
Input Sensitivity
Input Impedance
Load Impedance (stereo)
Load Impedance (bridged)
Supply Voltage
Damping Factor
Slew Rate
2ohm STEREO
4 X 75
4 X 150
4 X 250
4 X 100
2ohm MONO
1 X 400
20Hz - 20kHz
10Hz - 50 kHz
>0.02%
<110dB
Instrumentation
150mV - 12 Volts RMS
(with -12dB pad)
40 kOhms
2 - 8 Ohms
4 - 8 Ohms
11 - 16 Volts
>500
>20V/µs
3
4ohm MONO
2 X 150
2 X 300
2 X 500
2 X 200